Marvin Windows And Doors - Problems with Marvin Windows & Doors Leaking

97 of 105 Marvin Windows And Doors reviews

My wife & I are in a nightmare.We bought and remodeled our dream home two years ago and installed all Marvin windows & doors.

They began leaking almost immediately. After fighting with the builder for a year about installation it was discovered the windows themselves are defective. Marvin had an independent testing company come in over six months ago and the testing company confirmed they are defective. Water continues to penetrate and damage our home but Marvin is only willing to send us new windows and not pay for the installation (est > $130K) and the interior damage to our home (est >$100K).

Has anyone had any luck with this company?Help!

This review is a subjective opinion of a user.
Report Comment Private message author

More Review Details

Product or service
Hurricane Proof Woindows And Doors
Review category
Appliances and Electronics
review #205200
Had an experience with Marvin Windows And Doors? Submit review ›
Helpful? 44 Yes 44 38 No 38
Had the same issue 19 Yes 19
97 of 105 Marvin Windows And Doors reviews

Aug 18, 2016 #1200795 Apex, North Carolina, United States

29 years ago, our builder installed very expensive E-glass Marvin windows in our large home. Over the past two years, 13 windows have lost their seals with resulting moisture intrusion. The hooks in three windows that hold the windows in an up position failed, and the entire window had to be replaced. In all, we have spent about $10,000 on replacement so far, with another $10,000 to go. Apparently, the year after we purchased the windows, they were discontinued. We are appalled. Will never use Marvin products again.

0 0 Reply

Jan 11, 2016 #1092360

I have 5 year old marvins. Im here because they are terrible, wet, drafting etc. Cold in mn. My old wood slider single panes were better

0 0 Reply

Dec 31, 2015 #1086507

Has anyone had trouble with Marvin hurricane windows fogging up in southern climates? This happens almost daily only on the outside of the windows. We have been told that it is just one of the things that you deal with in southern climates. We do not keep our home below 70 degrees at night. Question could this be a problem of the windows having lost the inert gas between the panes?

0 0 Reply

Jan 04, 2015 #925696 Sacramento, California, United States

Installation is KEY. I would love to know if the installs were AAMA certified and what flashings and caulks were used. Installers cut corners .We install Marvin and Integrity and have not had ONE leak in 30 years. We also partner with the best stucco and siding installers that go hand in hand with a great window install. Marvin is still the best product out there and Ultrex is the best fiberglass window available.

0 1 Reply

Jan 11, 2015 #929527 Laguna Niguel, California, United States

I just installed 16 Marvin Integrity Ultrex fiberglass casement windows. The weather seals were poorly cut in manufacture, so water drips inside the casement. Once inside the casement, it drips down into the bottom 45s, many of which of which are not sealed, so from there it wicks in and ruins the wood sill. I have these leak problems with about eight of the sixteen installs. Moreover, the exterior mull covers were very sloppily installed and many of the interior plastic trim pieces arrived severely deformed. And you say you have never seen a Marvin window leak after installing them for 30 years? In my opinion, based on my experience, I cannot imagine a plausible chance that you are anything less than a bald faced liar. I expect Marvin to fix these problems. If they do, then great. If they don't, then they will never hear the end of it from me.

2 0 Reply

Jul 31, 2014 #849084

We have been dealing with a Marvin Integrity nightmare for the past 9 months. We used these windows and french doors for the new home we built. The doors have been replaced 5 times already. Every double hung has been replaced at least once but 11 of them have had their 4th replacement. All of the awning windows have nails showing that never hit the frame. Let me note that most of these replacements were not even acceptable to the distributor in our area that handles all Marvin issues in my area. They have done their best but they don't make the product which is TERRIBLE in my opinion. I will never ever use them again. I hope this helps others from the same fate.

2 0 Reply

Jul 11, 2014 #839455

I have the Marvin ultrex sliders since 1998 I installed them myself they are the best windows I ever installed no leaks and after 16 years they work and feel and look like I just installed them. That's the test of time there is no better test sorry to hear you have that problem

0 2 Reply

Aug 14, 2013 #699769 Milwaukee, Wisconsin, United States

These folks are uninformed, most new homes settle causing the frame to rack, and have tons of moisture, from new construction. Its all in the installation. We have looked between Marvin and Anderson they are similar its the installers. Make sure what ever you buy you can replace the seal in the frame this is where the problem starts!

0 1 Reply

Jul 23, 2013 #686066 Minneapolis, Minnesota, United States

We have 2004 Marvin Integrity windows. There has been mold since day one. They came to look and haven't done anything about it. I am tired of cleaning mold off of the vinyl inner track. Any ideas how to proceed?

6 0 Reply
Doug Rose

Nov 04, 2012 #564471

This site is very illuminating. We are shopping windows and sliding doors now for a new custom home. We were set on Marvin. Now we plan to expand our search. Too many dissatisfied customers.

1 0 Reply

Jan 23, 2013 #597270 Chicago, Illinois, United States

Same here in Chicago.... had been set on Marvin and will now look @ Andersen.

1 0 Reply

Mar 25, 2013 #628522

DO NOT BUY ANDERSENS. The glass is warranted for 20 yrs. Vinyl clad comes off. Andersen says other parts warranted for 10 yrs. Vinly exterior clad came ungluged. Allowed water to go in between vinyl and wood. Won't replace. Acts of God are not only hurricane, snow, ice....but sunshine an rain too. Thought they were the best. HYMBUG!!!Floor and frame rotting, termites trying to next up. Terrible nightmare.

0 0 Reply

May 11, 2013 #649404 Chicago, Illinois, United States

I find this hard to believe that the Andersen windows did this as they way the cladding is vacuum formed onto the sash and frame is highly unlikely the cladding could come off. Furthermore, it is not glued on. I have been to their factory to see their process for myself. Are you sure you don't have another manufacturer's product?

0 0

Aug 21, 2015 #1022791

Don't buy Andersen they are just as bad, if not worst!!

0 0 Reply
just the facts

Jun 19, 2013 #666649 Midland, Texas, United States

Illuminating? This is all conjecture. There are not facts or details given here, what about the installation?...anyone can say anything.

0 0 Reply

Oct 24, 2012 #559415

I installed Marvin metal clad windows in 1997, new house and at the builders recommendation. These have leaked air from around the sash and built up huge ice on the surface every winter. Marvin rep came out and blamed it all on humidity in the house, I have no more than 40 per cent in winter and there are only two of living here.
I see Marvin won a lawsuit againstPPG Industries in 2001 or 2002 claiming that the wood preservative PPG used failed.
Anyone had windows replaced because of this lawsuit?

0 0 Reply
Devon Walton in  Minnesota

Oct 19, 2012 #557274

I installed Marvin Integrity wood windows in my home as an upgrade to the builders' windows in my new construction home in 2004. All of the glass panes are already cold and it is only 43 degrees outside right now. Last winter, I had to plastic cover the insides of my patio door as you couldn't stand near it in a strong breeze. If I could, I would replace them all right now. I am burning serious dollars in the summer for cooling and wearing heavy socks in my home in the winter. Unbelievable....

0 0 Reply

Jul 06, 2012 #508315

Hi Tom:I live in Ill, built a house in 2003 with marvin windows and have experienced your problems from day one. Marvin came in caulked and changed one window and I thought problem was solved. Since then nine, years later, I have mold and rotting of two windows right next to the one they originally changed. Last year seven small oval windows in my living room were changed due to some kind of deterioration (dust). On 6-29-12 we had a severe storm and almost all windows leaked. My guarantee is up this month Marvin has agreed to provide us new windows but will not cover installation fees. I also wonder if we change these windows now, how long before they deteriorate again? and will Marvin replace product without charge? How is your situation now? any progress with Marvin?

0 0 Reply

Jun 18, 2012 #498150

It's amazing that every complaint for EVERY brand is about leaking or rotting, but people just don't connect the dots. You folks should know that it's 20% window, 80% installation! Is the water coming through the window itself? NO! Was the frame flashed and sealed correctly? Unless you give the details of the exact product AND the name of the installer (who is an authorized Marvin installer, right, right?), please don't post anything. Thank you.

1 0 Reply
gj from st. louis

May 14, 2012 #479936

replaced 4 sets sliding doors with Marvin patin doors. Noticed rot around the interior wood at the lower edge of one of the doors that seldom is opened and discovered the lower corner was rotted. Local rep came out and took photos - said the water came in at the lower edge of the glass and the design was hanged shortly after mine were built. This was just after the warranty expired, but had gone unnoticed for some time. I was supposed to hear something from "the factory" never did. Found another one rotting at the top. Would not buy again

0 1 Reply

1-20 of 36 comments

Great comment! Would you like to convert it into review?

You will be able to edit the text before publishing.

You May Also Like

You were reading a complaint about Marvin Windows And Doors.
Filing a new complaint about