Marvin Windows And Doors - Doors leak, locks break, retractable screens fall apart

81 of 105 Marvin Windows And Doors reviews

Have a new house built in 2010 with 40 Marvin casement style, metal clad, wood windows with retractable screens; 4 metal clad wood sliding doors with low profile sills; and 4 single and 2 double French doors.The window hardware rubs the wood when opening and closing, the windows need constant hardware adjustment in order to open and lock shut, and the retractable screen mechanism fails frequently leaving ugly screens hanging inside the house.

The windows do not slide open to allow cleaning the outside without applying silicone spray along the metal track, and the rubber screen keepers come loose from the wood leaving a large gap and exposed edges. When the wind blows, cold air comes in around the inside of the window frames. The ten and twelve foot metal clad, wood sliding doors leak water into the bottom track when it rains and cause damage to draperies... According to Marvin this is normal and the water should drain out eventually; it does not.

The rubber weatherstrip along the multi-panel sliding doors comes out of its track making them hard to move and allowing wind and water inside. The only way to fix weatherstrip is to remove the door and reattach it. Unfortunately it just comes out again in a few months. The fancy door locks stop working, the hook part that catches falls inside the door; the handle has to be removed and re-installed to fix the lock.

I have one lock that has been fixed four times. All of my metal clad sliding doors have split joints and leak air around the edges. Marvin serviced the windows and doors several times when they were new. Now that they are literally coming apart, they volunteer to send the parts out for free; unfortunately the labor cost is the expensive part of the repair.

I would never buy Marvin again; my windows and doors were supposed to be some of their best products. There is no way to clean the retractable screens because they are not held in the frame securely enough to vacuum and can't be removed to wash.

My recommendation, save yourself a lot of misery and buy Anderson or some other brand.Marvin products are poorly designed and built.

This review is a subjective opinion of a user.
Report Comment Private message author

More Review Details

Monetary loss:
Review category
Building Products
review #394129
Had an experience with Marvin Windows And Doors? Submit review ›
Helpful? 10 Yes 10 27 No 27
Had the same issue 5 Yes 5
81 of 105 Marvin Windows And Doors reviews
VERY disappointed with Marvin

Aug 06, 2013 #694815 Santa Barbara, California, United States

I too have installed Marvin metal clad wood casement and double hung windows. I have been experiencing several issues with them and since it has been more than two years they will only send parts and I pay for the repairman. It has been a few months and they still have not even sent me all the parts that are needed to fix them. Maybe check out Pella . . .

0 0 Reply

Jul 21, 2013 #684661 Lafayette, California, United States

I am currently having problems with the retracting screen on a Marvin casement window. It will not retract and the fabric has come out of the edge slots. I have contacted the company that sold the Marvin window to us, but have not had any response yet.

0 0 Reply
Repair Person

Mar 30, 2013 #630439 Fair Oaks, California, United States

Have you tried contacting the distributor in your area to get the windows serviced? Did they turn you down?

0 0 Reply
Great comment! Would you like to convert it into review?

You will be able to edit the text before publishing.

You May Also Like

You were reading a complaint about Marvin Windows And Doors.
Filing a new complaint about