filters
state:
Show
city:
Show
"This company is the worst machining company . My husband worked there as a machinist and he would tell me they were the worst in the business. My husband told me George Braswell is a *** man. He cheats every machining work. They would give him welded parts that went...
Read more
I didn't like
  • Not a quality minded owner
  • Management by the owner
#999864
Reply to reviews
I have never worked for such an egotistical liar in my life!! All I can say is this: since he's making military parts, I would suggest having each part closely inspected. He cheats on paperwork and lies about his DSQR inspector. They just had one leave and wouldn't you...
Read more
Anonymous

Iknewit4839 OMG! I suspected that kid was his. She looks just like him! Pretty sick! He dated the mother than moves on to screw her daughter!

1.0
#967092
Reply to reviews
Quality is an issue at any company. The inspection department is a revolving door. I personally worked there I should know. No one likes a micro manager and that is exact what the owner does and then some. In the short time I was there the lead CMM Programmer left the...
Read more
I liked
  • Co-workers
I didn't like
  • Management by the owner
  • Not a quality minded owner
#802181
Reply to reviews

Machined Parts For The Aerospace Industry Review

#967095
1.0
He also messes with people's money. If he knows you don't pay attention to your paycheck, he will rip you off every chance he can. For example, he would constantly *** anywhere from .25 hours to multiple hours. If you do decide to wor there please, please check you pay stubs.
Comment
Show

Sales Representative Review

#548800
This company sucks. The sales rep Lucy Boyd is a full blooded Brooklyn MD ***....
Comment
Show

Sick Employee Review

#548799
Got sick working there
Comment
Show
I've been here four years and love this place... The people complaining couldn't hold a job. You gotta come to work and do your job. Stop whining and get a life... Bunch of idiots... Smh...
Read more
Anonymous

Anonymous This must be one of his "pets", George himself or Lucy. Maybe even one of the girls he's screwing in the office. Lol. Wake up and get a real job! You must be blind. He does ...

Command Technology, Inc. in Curtis Bay, MD. Worst in machining biz there is!
"This company is worse than what has been said. My husband worked there as a machinist and he would tell me they were the worst in the business. They would give him welded parts that went to planes, missiles, satellites, etc... These parts were for big companies like...
Read more
Anonymous

Anonymous Couldn't agree more! They also use hardware that they don't have any certifications for and fudge the carts. They use expired bonding supplies. They use material that doesn't...

Anonymous

Anonymous ***! The screw and glue parts for better strength... Sounds like sour grapes to me... Smh

#637320
Reply to reviews
This company is worse than what has been said. My husband worked there as a machinist and he would tell me they were worst in the business. They would give him welded parts that went to planes, missiles, satellites, etc... These parts were for big companies GE,...
Read more
1.0
I didn't like
  • Dangerous to military families
#626332
Reply to reviews
George may not be a saint but who is. He is a fair man who takes care of his workers, suppliers and customers. If all that is said about him here were true, he would be in jail and out of business. And guess what... He's not. George is a good and kind man who runs a...
Read more
Anonymous

Anonymous Try telling that to the inspection department. It is a revolving door. I personally worked there I should know. No one likes a micro manager and that is exact what George does...

Anonymous

en3wo So NOT TRUE! George does NOT take care much about his workers/employees! He pays them as little as possible and has even cut their pay without remorse. According to some emplo...

#619754
Reply to reviews
BE CAREFUL DEALING WITH THEM. THIS COMPANY SHOULD NEVER BE GIVEN MILITARY CONTRACTS. IF YOU DO GIVE HIM CONTRACTS YOU NEED TO XRAY EVERYTHING FOR WELDS!!! GEORGE EVEN HAS A LAWSUIT PENDING FOR LABOR PRACTICES... BE VERY CAREFUL THE #H#RES WILL LIE FOR HIM. HE IS...
Read more
Anonymous

Anonymous Wow! It looks like George Braswell, the owner of Command Technology, Inc. tried to get away with not paying taxes. Isn't that criminal behavior and you can got to JAIL for tha...

#545367
Reply to reviews
Command Technology - Commandtech.net
Command Technology - Commandtech.net
Command Technology - Commandtech.net
I agree with these posts! George Braswell and his crew are the most unscrupulous, sketchy and manipulative people I've ever met. They will LIE their *** off to make a sale and call it a "manufacturing sales technique"! Their so called techniques are no doubt...
Read more
Anonymous

Anonymous I have news for you people. NOBODY in manufacturing EVER wear a gold tie and a shiny shirt. If you run into this chances are you are dealing with a baptist minister, a used ca...

Anonymous

Anonymous Lucy Tate Boyd who is a sales rep in Command Technology is the worst uneducated person you can ever imagine.I asked her to specify and identify parts and all what she emailed ...

#328780
Reply to reviews
Command Technology - Mr. George Braswell is a LOW LIFE!
The owner of Command tech in Curtis Bay, Baltimore is such a LOSER of a man! He and his employees are complete liars and very trashy low class people. Do not trust any of them! There is no truth in anything they say. I can't even count just how many times these losers...
Read more
Anonymous

Useful This info. is so TRUE! Anyone who says "***" is just George Braswell or his worker ants trying to cover for him. :grin :p